|
|
|
|
COMPANY |
|
|
|
|
|
|
Home>COMPANY>Equipment |
Raw material | Thickness | Width | Inside diameter | Outside diameter | Weight | 1.5mm~6.0mm | 600mm~1600mm
| Φ508mm/Φ610mm/Φ760mm | Ф800mm~Φ2200mm | 35000kg(MAX) | Processing capacity | Tensile strength:≤590Mpa;Yield strength:≤400Mpa;The number of processing:(a)max 25(thickness:1.5-3.0mm),(b)max15(thickness:3.1mm-5.0mm),(c)max8(thickness:5.1mm-6.0mm);The length of finished products:32mm-1600mm;Outside diameter of finished products:≤Φ2200mm;Inside diameter of finished products:Φ508mm/Φ610mm;The minimum amount of trimming:not tess than 5mm;The maximum amount of trimming:not more than 30mm;The maximum coil weight of finished products:25000kg. | Capacity of equipment | Linear velocity:0~120m/min(provided that the thickness is less 3mm;can bi changed)0-60m/min (provided that the thickness is more than 3mm,the rate can be changed);Wear rate: 10-20m/min (can be changed). | Wording accuracy | Width tolerance:(a)≤±0.1mm(thickness:1.0-3.0mm),(b)≤±0.15mm(thickness:3.1-5.0mm),(c)≤±0.2mm(thickness:5.1-6.0mm);Edge burr:≤4%of the plate thickness;Camber:≤0.5mm/m Coiling staggered level:≤±1mm;Coiling pagoda:≤±3.0mm. |
|
|
|
|
|
Copyright 2014 Jiangsu Shagang Jiulong Cold Rolled Steel Processing Co.,Ltd. All rights reserved 【苏ICP备14044888号】 |
Add:No.9, Chuangyue road,Jiangsu Yangtze International Metallurgical industrial park,Jinfeng town,Zhangjiagang city,Jiangsu province Tel:0512-35002982 35002986 Fax:0512-35002998 |
|
|
|
|