|
|
| |
| |
 |
COMPANY |
|
|
|
|
| |
|
|
| Home>COMPANY>Equipment |
|
| Raw material | Thickness | Width | Inside diameter | Outside diameter | Weight | | 0.15mm～2.3mm |
100mm～800mm
| Φ508mm/Φ610mm | Ф600mm～Φ1600mm | 15000kg（MAX） | | Processing capacity | Tensile strength:≤600Mpa;Yield strength:≤480Mpa;The number of processing:(a)max 30(thickness:0.15-1.0mm),(b)max5(thickness:1.1mm-2.0mm),(c)max3(thickness:2.1mm-2.3mm);The length of finished products:12mm-800mm;Outside diameter of finished products:≤Φ1600mm;Inside diameter of finished products:Φ508mm;The minimum amount of trimming:not less than 3mm;The maximum amount of trimming:not more than 15mm;The maximum weight of burrs:150kg;The maximum coil weight of finished products:15000kg. | | Capacity of equipment | Linear velocity;0-150m/min(can be changed);Wear rate:0-15m/min(the rate can be changed). | | Wording accuracy | Width tolerance:(a)≤±0.05mm(slitting width＜300mm,thickness:0.15-1.0mm),(b)≤±0.1mm(slitting width＜300mm,thickness:1.1-2.3mm);Edge burr:≤3% of the plate thickness,but not less than 0.02mm;Camber:≤0.3mm/m;Coiling staggered level:≤±0.05mm;Coiling pagoda:≤±1.5mm(except the first 5 levels). |
|
|
|
|
|
| Copyright 2014 Jiangsu Shagang Jiulong Cold Rolled Steel Processing Co.,Ltd. All rights reserved 【苏ICP备14044888号】 |
Add:No.9, Chuangyue road,Jiangsu Yangtze International Metallurgical industrial park,Jinfeng town,Zhangjiagang city,Jiangsu province
Tel:0512-35002982 35002986 Fax:0512-35002998 |
|
|
|
|
