|
|
| |
| |
 |
COMPANY |
|
|
|
|
| |
|
|
| Home>COMPANY>Equipment |
|
| Raw material | Thickness | Width | Inside diameter | Outside diameter | Weight | | 0.15mm～2.3mm |
350mm～1650mm
| Φ508mm/Φ610mm | Ф700mm～Φ2000mm | 20000kg（MAX） | | Processing capacity | Tensile strength:≤600Mpa;Yield strength:≤450Mpa;The number of processing:(a)ma*40(thickness:0.15-1.0mm),(b)ma*19(thickness:1.1mm-2.0mm),(c)ma*15(thickness:2.1mm-2.3mm);The length of finished products:22mm-1650mm;Outside dlameter of finished products:≤Φ2000mm;Inside dlameter of finished products:Φ508mm/Φ610mm;The minimum amount of trimming:not less than 3mm;Then maximum amount of trimming:not more than 15mm;The maximum weight ofburrs:150kg;The maximum coil weight of finished products:20000kg. | | Capacity of equipment | Linear velocity;0-180m/min(can be changed);Wear rate:0-20m/min(the rate can be changed). | | Wording accuracy | Width tolerance:(a)≤±0.05mm(slitting width ＜ 300mm,thickness:0.15-1.0mm),(b)≤±0.1mm(slintting width ＜300mm,thickness:1.1-2.3mm);Edge burr:≤3%of the plate thickness,but not less than 0.02mm;Camber:≤0.3mm/2m;Coiling staggered level:≤±0.05mm；Coiling staggered level:≤±0.05mm;Coiling pagoda:≤±2.0mm（except the first 5 levels）. |
|
|
|
|
|
| Copyright 2014 Jiangsu Shagang Jiulong Cold Rolled Steel Processing Co.,Ltd. All rights reserved 【苏ICP备14044888号】 |
Add:No.9, Chuangyue road,Jiangsu Yangtze International Metallurgical industrial park,Jinfeng town,Zhangjiagang city,Jiangsu province
Tel:0512-35002982 35002986 Fax:0512-35002998 |
|
|
|
|
